top of page
Osteometriske brædder og spredeskiver
Lab Osteometric Board
$1100.00
Features 1" thick acrylic base sheet and Kydex vertical measurement planes for extreme durability.
Constructed of acrylic, aluminum, brass, and stainless steel.
Provides the durability and accuracy required for years of reliable service.
Provides unparalleled linear tracking and fluidity of motion.
Measurement is accomplished via a linear scale (1/2 mm increment) mounted and indexed to the rear of the board.
End planes are removable for ease of shipment and storage.
ASME standardized.
Do not use the mounted scale alone to measure mid-shaft. The scale is offset to compensate for the thickness of the measuring plates and mounting point.
If you need a mid shaft measurement, ask us about what ruler to order.
Features 1" thick acrylic base sheet and Kydex vertical measurement planes for extreme durability.
Constructed of acrylic, aluminum, brass, and stainless steel.
Provides the durability and accuracy required for years of reliable service.
Provides unparalleled linear tracking and fluidity of motion.
Measurement is accomplished via a linear scale (1/2 mm increment) mounted and indexed to the rear of the board.
End planes are removable for ease of shipment and storage.
ASME standardized.
Do not use the mounted scale alone to measure mid-shaft. The scale is offset to compensate for the thickness of the measuring plates and mounting point.
If you need a mid shaft measurement, ask us about what ruler to order.
Field Osteometric Board
$799.00
-Composed of high impact Plexiglas and aluminum
-Reduced weight by over 70% compared to older boards.
-The Field Osteometric board features the same measurement method as the Laboratory Osteometric Board minus the rod and bearing assembly
-Collapsible to 12" x 6.5" x 1 1/2".
-Scales are laser etched directly onto the board's base along with guide lines (cm).
-Constructed of mostly Plexiglas.
-Board can be customized with your name or identification mark at no extra cost.
-ASME standardized.
-Composed of high impact Plexiglas and aluminum
-Reduced weight by over 70% compared to older boards.
-The Field Osteometric board features the same measurement method as the Laboratory Osteometric Board minus the rod and bearing assembly
-Collapsible to 12" x 6.5" x 1 1/2".
-Scales are laser etched directly onto the board's base along with guide lines (cm).
-Constructed of mostly Plexiglas.
-Board can be customized with your name or identification mark at no extra cost.
-ASME standardized.
Field Osteometric Board: Student Edition
60,00 USD
-Nøjagtig til 0,5 mm
-Fremstillet af 1/4" -Sort laserætset akryl.
-Smalere måleflade (end standardplade) og ingen integrerede lodrette måleplaner.
-Du sørger for de lodrette måleflader (eksempler: bøger med hårdt omslag, træklodser osv.).
- Opdeles i to stykker for bærbarhed
-ASME standardiseret.
- Leveres med en mikrofiber sleeve til rengøring og opbevaring.
-Nøjagtig til 0,5 mm
-Fremstillet af 1/4" -Sort laserætset akryl.
-Smalere måleflade (end standardplade) og ingen integrerede lodrette måleplaner.
-Du sørger for de lodrette måleflader (eksempler: bøger med hårdt omslag, træklodser osv.).
- Opdeles i to stykker for bærbarhed
-ASME standardiseret.
- Leveres med en mikrofiber sleeve til rengøring og opbevaring.
Spreading Calipers
$525.00
Based on the same dimensions and design as the classic instrument that has been used by anthropologists since the beginning of last century but updated with modern materials and utilizing state of the art manufacturing techniques.
Main body is machined out of aircraft grade 1/4 inch aluminum plate.
Scale is machined stainless and permanently laser engraved 0 - 30 cm in 1mm increments.
Measuring surface options:
Ground stainless steel ball ends
Assure accuracy after long term use
Prevent damage to the measured specimen.
Ground pointed ends
For precise measurement.
Joint surface utilizes a stainless steel contact plate to afford even friction along the measurement range eliminating the need for a thumb lock.
Entire unit weighs in at less than 5 and 1/2 ounces.
Main body dimensions are 12" x 4" when closed.
ASME standardized.
Based on the same dimensions and design as the classic instrument that has been used by anthropologists since the beginning of last century but updated with modern materials and utilizing state of the art manufacturing techniques.
Main body is machined out of aircraft grade 1/4 inch aluminum plate.
Scale is machined stainless and permanently laser engraved 0 - 30 cm in 1mm increments.
Measuring surface options:
Ground stainless steel ball ends
Assure accuracy after long term use
Prevent damage to the measured specimen.
Ground pointed ends
For precise measurement.
Joint surface utilizes a stainless steel contact plate to afford even friction along the measurement range eliminating the need for a thumb lock.
Entire unit weighs in at less than 5 and 1/2 ounces.
Main body dimensions are 12" x 4" when closed.
ASME standardized.
Sprede skydelære: Elev
**Kommer snart!**
99,00 USD
Krop og vægt bearbejdet af 1,5 mm tykt 316 rustfrit stål for holdbarhed og besparelser
Indeks lavet af bearbejdet marinemessing
Samlinger sikret med aluminiumsnitter
Skaler laser ætset i samme trin som standard spredemåler med interpolation til 0,5 mm nøjagtighed mulig
Meget holdbar og vil vare mange års misbrug i laboratoriet.
Spread Caliper Case PASSER IKKE til Elev Spread Caliper
Hver Caliper kalibreres og kontrolleres ved hjælp af samme metode som standard spredekalibre.
ASME standardiseret.
Hvis armene nogensinde bliver bøjede, er det meget nemt at bringe dem tilbage til flade. Hvis de ser ud til at være beskadigede, så du ikke kan reparere dem, så send dem til mig, så ordner jeg det gratis, hvis det overhovedet er muligt.
99,00 USD
Krop og vægt bearbejdet af 1,5 mm tykt 316 rustfrit stål for holdbarhed og besparelser
Indeks lavet af bearbejdet marinemessing
Samlinger sikret med aluminiumsnitter
Skaler laser ætset i samme trin som standard spredemåler med interpolation til 0,5 mm nøjagtighed mulig
Meget holdbar og vil vare mange års misbrug i laboratoriet.
Spread Caliper Case PASSER IKKE til Elev Spread Caliper
Hver Caliper kalibreres og kontrolleres ved hjælp af samme metode som standard spredekalibre.
ASME standardiseret.
Hvis armene nogensinde bliver bøjede, er det meget nemt at bringe dem tilbage til flade. Hvis de ser ud til at være beskadigede, så du ikke kan reparere dem, så send dem til mig, så ordner jeg det gratis, hvis det overhovedet er muligt.
bottom of page